Araştırma

tesla01

İlgi Alanları

  • İnsanız hava araçları
  • Akış kontrolü
  • Doğrusal olmayan kontrol
  • Dinamik modelleme
  • Kayan kipli kontrol
  • Uyarlamalı kontrol
  • Doğrusal parametre ile değişen sistemler

Uluslararası hakemli dergilerde yayınlanan makaleler

  • Kasnakoğlu C., Serrani A., Attenuation of Oscillations in Galerkin Systems Using Center Manifold Techniques, European Journal of Control, 13 (5), 529–542 (2007), DOI:10.3166/ejc.13.529-542. (PDF) (PDF)
  • Kasnakoğlu C., Serrani A., Efe, M.Ö., Control Input Separation by Actuation Mode Expansion for Flow Control Problems, International Journal of Control, 81 (9), 1475–1492 (2008), DOI: 10.1080/00207170701867857. (PDF) (PDF)
  • Caraballo E., Kasnakoğlu C., Serrani A., Samimy M., Control Input Separation Methods for Reduced-Order Model-Based Feedback Flow Control, AIAA Journal, 46 (9), 2306–2322, (2008), DOI: 10.2514/1.35428. (PDF) (PDF)
  • Efe M.Ö., Kasnakoğlu C., A Fractional Adaptation Law for Sliding Mode Control, International Journal of Adaptive Control and Signal Processing, 22 (10), 968–986 (2008), DOI: 10.1002/acs.1062. (PDF) (PDF)
  • Kasnakoğlu C., Camphouse R.C., Serrani A., Reduced-Order Model-Based Feedback Control of Flow Over an Obstacle Using Center Manifold Methods, ASME Journal of Dynamic Systems, Measurement, and Control, 131 (1), 011011 (2009), DOI:10.1115/1.3023122. (PDF) (PDF)
  • Kim K., Kasnakoğlu C., Serrani A., Samimy M., Extremum Seeking Control of Subsonic Cavity Flow, AIAA Journal, 47 (1), 195–205, (2009), DOI: 10.2514/1.38180. (PDF) (PDF)
  • Erbil T.N., Kasnakoğlu C., Feedback flow control employing local dynamical modelling with wavelets, Mathematical and Computer Modelling of Dynamical Systems, 15 (6), 493-513, (2009), DOI: 10.1080/13873950903187253. (PDF) (PDF)
  • Kasnakoğlu C., Building linear parameter varying models using adaptation, for the control of a class of nonlinear systems, Turkish Journal of Electrical Engineering & Computer Sciences, 18 (1), 83-100 (2010), DOI: 10.3906/elk-0901-9. (PDF) (PDF)
  • Kasnakoğlu C., Control of Oscillations in Flow Problems under Frequency Limitations, Journal of Vibration and Control, 16 (13), 1941-1966, (2010), DOI: 10.1177/1077546309348852. (PDF) (PDF)
  • Kasnakoğlu C., Modelling flow control problems under diverse operating conditions by identification and blending of multiple systems, Transactions of the Institute of Measurement and Control, 32 (4),  419-439, (2010), DOI: 10.1177/0142331209347650. (PDF) (PDF)
  • Kasnakoğlu C., Control of nonlinear systems represented by Galerkin models using adaptation-based linear parameter-varying models, International Journal of Control, Automation and Systems, 8 (4), 748-761, (2010), DOI: 10.1007/s12555-010-0406-2. (PDF) (PDF)
  • Kasnakoğlu C., Modeling and control of flow problems by adaptation-based linear parameter varying models, Turkish Journal of Electrical Engineering & Computer Sciences, 18 (5), 819-852 (2010), DOI: 10.3906/elk-0901-9. DOI: 10.3906/elk-0906-5. (PDF) (PDF)
  • Erbil T.N., Kasnakoğlu C., Regional dynamical modeling and control of flow problems under unmeasurable and non-constant viscosity, Transactions of the Institute of Measurement and Control, 34(8), 966–973, (2011), DOI: 10.1177/0142331211427489. (PDF) (PDF)
  • Güngör, A., Ozbayoglu, A.M., Kasnakoglu, C., Biyikoglu, A., Uysal, B.Z., Determination of Air/Fuel and Steam/Fuel Ratio for Coal Gasification Process to Produce Synthesis Gas, Journal of Environmental Science and Engineering, 5(5), 799-804, (2011). (PDF) (PDF)
  • Güngör, M. Özbayoğlu, C. Kasnakoğlu, A. Bıyıkoğlu, B.Z. Uysal, A parametric study on coal gasification for the production of syngas, Chemical Papers, 66(7), 677-683, (2012), DOI: 10.2478/s11696-012-0164-0. (PDF) (PDF)
  • Durmaz, O., Karaca, H. D., Ozen, G. D., Kasnakoglu, C., Kurtulus, D. F., Dynamical modelling of the flow over a flapping wing using proper orthogonal decomposition and system identification techniques, Mathematical and Computer Modelling of Dynamical Systems, 19(2), 133-158, (2013), DOI: 10.1080/13873954.2012.705859. (PDF) (PDF)
  • Batmaz A. U., Elbir O., Kasnakoglu C., Design of a Quadrotor Roll Controller Using System Identification to Improve Empirical Results, International Journal of Materials, Mechanics and Manufacturing, 1(4): 347-349, (2013), DOI: 10.7763/IJMMM.2013.V1.75. (PDF) (PDF)
  • Ozbayoglu, A. M., Kasnakoglu, C., Gungor, A., Biyikoglu, A., & Uysal, B. Z., A two-stage water-gas shift reactor model to obtain desired synthesis gas characteristics with adjustable reactor parameters. Journal of the Faculty of Engineering and Architecture of Gazi University, 28(2), 339-351, (2013). (PDF) (PDF)
  • Kasnakoglu, C., Active Queue Management of TCP Flows with Self-scheduled Linear Parameter Varying Controllers, International Journal of Computers Communications & Control, 2013, 8(6), 838-844, (2013), DOI: 10.15837/ijccc.2013.6.9. (PDF) (PDF)
  • Karaca, H. D., Özen, G. D., Kasnakoğlu, C., A Nonlinear Dynamical Modeling and Control Method for the Vorticity Control of the Flow Past a Circular Cylinder, International Journal of Materials, Mechanics and Manufacturing, 1(4): 324-346, (2013), DOI: 10.7763/IJMMM.2013.V1.74. (PDF) (PDF)
  • Akyürek, Ş., Özden, G. S., Kasnakoğlu, C., Development of an Experimental Setup for the Altitude Control of a Ball in a Pipe. Applied Mechanics and Materials, 789, 1016-1020, (2015). DOI:10.4028/www.scientific.net/AMM.789-790.1016. (PDF) (PDF)
  • Şahin, İ. H., Kasnakoğlu, C., An Affine Parameter Dependent Controller of An Helicopter for Various Forward Velocity Conditions. Applied Mechanics & Materials, 789, 1067-1072, (2015). DOI:10.4028/www.scientific.net/AMM.789-790.1067. (PDF) (PDF)
  • Onkol, M., Kasnakoğlu, C., Modeling and Control of a Robot Arm on a Two Wheeled Moving Platform, Applied Mechanics and Materials, 789, 735-741, (2015), DOI:10.4028/www.scientific.net/AMM.789-790.735. (PDF) (PDF)
  • Deveci, O., Kasnakoglu, C., Control of a Photovoltaic System Operating at Maximum Power Point and Constant Output Voltage under Different Atmospheric Conditions, International Journal of Computer and Electrical Engineering, 7(4): 240-247, (2015), DOI: 10.17706/IJCEE.2015.7.4.240-247. (PDF)  (PDF)
  • Kürkçü, B., Kasnakoğlu, C., Estimation of Unknown Disturbances in Gimbal Systems, Applied Mechanics and Materials, 789, 951-956, (2015). DOI:10.4028/www.scientific.net/AMM.789-790.951. (PDF) (PDF)
  • Atlas, E., Erdoğan, M. I., Ertin, O. B., Güçlü, A., Saygi, Y. E., Kaynak, Ü., Kasnakoğlu, C. Hardware-in-the-Loop Test Platform Design for UAV Applications. Applied Mechanics and Materials, 789, 681-687, (2015), DOI:10.4028/www.scientific.net/AMM.789-790.681. (PDF) (PDF)
  • Akyürek Ş., Özden, G. S., Atlas E., Kasnakoğlu, C., Kaynak, Ü., Design of a Flight Stabilizer System and Automatic Control Using HIL Test Platform, International Journal of Mechanical Engineering and Robotics Research, 5(1), 77-81, (2016). DOI: 10.18178/ijmerr.5.1.77-81. (PDF) (PDF)
  • Deveci, O., Kasnakoglu, C., Performance improvement of a photovoltaic system using a controller redesign based on numerical modeling, International Journal of Hydrogen Energy, 41(29), 12634–12649, (2016). DOI: 10.1016/j.ijhydene.2016.05.149. (PDF) (PDF)
  • Karaca H.D., Özen G.D., Kasnakoğlu C., Nonlinear modelling and control of the flow over aerofoils using CFD simulations, Simulation Modelling Practice and Theory, 67, 29–43, (2016). DOI: 10.1016/j.simpat.2016.06.009. (PDF) (PDF)
  • Kasnakoglu, C., Scheduled smooth MIMO robust control of aircraft verified through blade element SIL testing, Transactions of the Institute of Measurement and Control, (2016), DOI: 10.1177/0142331216661760. (PDF) (PDF)

Uluslararası bilimsel toplantılarda sunulan bildiriler

  • Ertan, B., H., Çamlıkaya, T., Demirel, O., Kasnakoğlu, C., A software for simulation and controller development for high frequency high voltage power supplies. Proceedings of the Third International Power Electronics and Motion Control Conference (IPEMC), Volume 2, 15-18 August, 665 – 670 (2000). (PDF) (PDF)
  • Acarman, T., Yaodong P., Kasnakoğlu, C., Özgüner, Ü., Control authority transition system, half-car platform, vehicular simulator and dynamic switching analysis between the human “being and driver assistance system, Proceedings of the IEEE Intelligent Vehicles Symposium, 9-11 June, 298 – 303 (2003). (PDF) (PDF)
  • Kasnakoğlu, C., Özgüner, Ü., Recent advances on the OSU virtual environment system test-bed and its applications, Proceedings of the IEEE Intelligent Vehicles Symposium, 9-11 June, 537 – 542 (2003). (PDF) (PDF)
  • Kasnakoğlu, C.,  Serrani, A., Analysis and Nonlinear Control of Galerkin Models Using Averaging and Center Manifold Theory, American Control Conference, July 11-13, New York City, 3035-3040 (2007). (PDF) (PDF)
  • Kim K., Kasnakoğlu C., Serrani A., Samimy M., Adaptive Extremum-Seeking Control of Subsonic Cavity Flows, 60th Annual Meeting of the Division of Fluid Dynamics, November 18–20, Salt Lake City, Utah (2007).
  • Efe M. Ö., Kasnakoğlu C., A Comparison of Architectural Varieties in Radial Basis Function Neural Networks, IEEE World Congress on Computational Intelligence (WCCI2008), June 1–6, Hong Kong (2008). (PDF) (PDF)
  • Kim K., Kasnakoğlu C., Serrani A., Samimy M., Extremum-Seeking Control of Subsonic Cavity Flow, 46th AIAA Aerospace Sciences Meeting and Exhibit, January 7-10, Reno, Nevada (2008). (PDF) (PDF)
  • Kasnakoğlu C., Caraballo E., Serrani A., Samimy M., Control Input Separation Methods Applied to Cavity Flow, American Control Conference, June 11-13, Seattle, Washington (2008). (PDF) (PDF)
  • Kasnakoğlu C., Efe M.Ö., Prediction of Dynamical Properties of Flow over a Three-element Airfoil via Computationally Intelligent Architectures, International Conference on Control, Automation and Systems, October 14-17, Seoul, Korea (2008). (PDF) (PDF)
  • Özbayoğlu A.M., Aydıner Z., Kasnakoğlu C., Özbayoğlu M.E., Neural Network and Genetic Programming in Pressure Loss Estimation in Eccentric Pipe Flow, Artificial Neural Networks in Engineering Conference, St. Louis, Missouri (2008). (PDF) (PDF)
  • Kasnakoğlu C., Constructing Linear Parameter Varying Models through Adaptation for the Control of a Class of Nonlinear Systems, Mediterranean Conference on Control and Automation, June 24-26, Thessaloniki, Greece (2009). (PDF) (PDF)
  • Erbil T.N., Kasnakoğlu C., Obtaining Regional Dynamical Models for Flow Control using Wavelet Transform, Mediterranean Conference on Control and Automation, June 24-26, Thessaloniki, Greece (2009). (PDF) (PDF)
  • Kasnakoğlu C., Frequency Constrained Control of Oscillations in Flow Problems, Mediterranean Conference on Control and Automation, June 24-26, Thessaloniki, Greece (2009). (PDF) (PDF)
  • Kasnakoğlu C., Modeling, Control And Evaluation of Fluid Flow Systems Using Adaptation Based Linear Parameter Varying Models, European Control Conference, August 23-26, Budapest, Hungary (2009). (PDF) (PDF)
  • Gungör, A., Ozbayoglu, A.M., Kasnakoğlu, C., Biyikoğlu, A., and Uysal, B.Z., Determination of Air/Fuel and Steam/Fuel ratio for Coal Gasification process to produce Synthesis Gas, 2nd International Conference on Nuclear and Renewable Energy Sources, 4-7 July, Ankara, Turkey (2010). (PDF) (PDF)
  • Ozbayoglu, A.M., Kasnakoğlu, C., Gungör, A., Biyikoğlu, A., and Uysal, B.Z., An Analysis of Water Gas-Shift Reactor Battery System for Synthesis Gas Refinement, 11th International Combustion Symposium, 24-27 June, Sarajevo, Bosnia-Herzegovina (2010). (PDF) (PDF)
  • Paksoy, A.,  Apacoglu, B., Aradag, S., Kasnakoglu, C., Analysis of Flow over a Circular Cylinder by CFD and Reduced Order Modeling, ASME 10th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2010),  Istanbul, Turkey (2010).
  • C. Kasnakoglu, U. Kaynak, Automatic Recovery and Autonomous Navigation of Disabled Aircraft After Control Surface Actuator Jam, AIAA Guidance, Navigation and Control Conference, Toronto, Canada (2010). (PDF) (PDF)
  • U. Kaynak, R. Akbaba, A. Kibar, C. Kasnakoğlu, N. Sezer-Uzol, E. Güleç, S. Tekelioğlu, and M.B. Solmaz, Design and Manufacture of a Fuel Cell Powered Unmanned Air Vehicle, International Unmanned Vehicles Workshop UVW2010, Istanbul, Türkiye, 10-12 June (2010). (PDF) (PDF)
  • Bıyıkoğlu, A., Güngör, C. Kasnakoğlu, M. Özbayoğlu and B. Z. Uysal, Effect of Operation Parameters on Gasification For The Production of Synthesis Gas, 27th Annual International Pittsburgh Coal Conference, 11-14 Ekim, İstanbul, Türkiye (2010). (PDF) (PDF)
  • Güngör, A., M. Ozbayoglu, C. Kasnakoğlu, A. Bıyıkoğlu and B. Z. Uysal, A Parametric Study on Coal Gasification For The Production Of Syngas, 8th European Conf. On Coal Research and Its Applications (ECCRIA-8), Leeds, İngiltere (2010).
  • Durmaz, O., Karaca, H. D., Ozen, G. D., Kasnakoglu, C., Kurtulus, D. F., Dynamical modeling of the unsteady flow over a flapping wing by applying proper orthogonal decomposition and system identification to particle image velocimetry data. IEEE Decision and Control and European Control Conference (CDC-ECC), 6546-6551, Florida, ABD (2011). (PDF) (PDF)
  • Korkmaz, H., Ertin, O. B., Kasnakoglu, C., Kaynak, U., Design of a Flight Stabilizer System for a Small Fixed Wing Unmanned Aerial Vehicle Using System Identification, IFAC Workshop on Advances in Control and Automation Theory for Transportation Applications (ACATTA 2013), 145-149, Istanbul, Türkiye (2013). (PDF) (PDF)
  • Aydogdu, M. F., Demirci, M. F., Kasnakoglu, C., Pipelining Harris Corner Detection with a Tiny FPGA for a Mobile Robot., 2013 IEEE International Conference on Robotics and Biomimetics (ROBIO 2013), 2177-2184, Shenzhen, Çin (2013). (PDF) (PDF)
  • Elbir, O., Batmaz, A. U., Kasnakoglu, C., Improving Quadrotor 3-axes Stabilization Results Using Empirical Results and System Identification, 9th IEEE Asian Control Conference (ASCC), Istanbul, Turkey, (2013). (PDF) (PDF)
  • Batmaz, A. U., Elbir O., Kasnakoglu C., Quadrotor Roll and Pitch Stabilization using System Identification based Redesign of Empirical Controllers, The 32nd IASTED International Conference on Modelling, Identification and Control (MIC 2013), February 11 – 13, Innsbruck, Austria (2013). (PDF) (PDF)
  • Ertin, O. B., Korkmaz, H., Kasnakoğlu, C., Hardware-in-the-loop Test Platform for a Small Fixed Wing Unmanned Aerial Vehicle Embedded Controller, International Conference on Intelligent Mechatronics and Automation (ICIMA), 1-5, February 2-3, Male, Maldives, (2013). (PDF) (PDF)
  • Batmaz, A. U., Elbir O., Kasnakoglu C., Design of a Quadrotor Roll Controller Using System Identification to Improve Empirical Results, IACSIT International Conference on Intelligent Mechatronics and Automation (ICIMA), 347-359, February 2-3, Male, Maldives, (2013). (PDF) (PDF)
  • Karaca, H. D., Özen G. D., Kasnakoğlu C., A Nonlinear Dynamical Modeling and Control Method for the Vorticity Control of the Flow Past a Circular Cylinder, International Conference on Intelligent Mechatronics and Automation (ICIMA), 1-5, February 2-3, Male, Maldives, (2013).  (PDF) (PDF)
  • Ertin O. B., Korkmaz H., Kaynak Ü., Kasnakoğlu C., Hardware-in-the-Loop Test Platform for a Small Fixed Wing Unmanned Aerial Vehicle Embedded Controller, The 32nd IASTED International Conference on Modelling, Identification and Control (MIC 2013), February 11 – 13, Innsbruck, Austria (2013). (PDF) (PDF)
  • Karaca H. D., Özen G. D., Kasnakoglu C., Designing a Feedback Vorticity Control System for the Flow Past a Circular Cylinder, The 32nd IASTED International Conference on Modelling, Identification and Control (MIC 2013), February 11 – 13, Innsbruck, Austria (2013). (PDF) (PDF)
  • Deveci O., Kasnakoğlu C., Control of a Photovoltaic System Operating at Maximum Power Point and Constant Output Voltage under Different Atmospheric Conditions, 2015 International Conference on Automatic Control (ICOAC 2015), April 28-29, Ankara, Türkiye (2015). (PDF) (PDF)
  • Onkol M., Kasnakoglu C., Modeling and Control of a Robot Arm On a Two Wheeled Moving Platform, 2015 International Conference on Automatic Control (ICOAC 2015), April 28-29, Ankara, Türkiye (2015). (PDF) (PDF)
  • Atlas E., Erdoğan M. İ., Ertin O. B., Guclu A., Saygı Y. E., Kaynak U., Kasnakoglu C., Hardware-in-the-loop Test Platform Design for UAV Applications, 2015 International Conference on Automatic Control (ICOAC 2015), April 28-29, Ankara, Türkiye (2015). (PDF) (PDF)
  • Kürkçü B., Kasnakoğlu C., Estimation of Unknown Disturbances in Gimbal Systems, 2015 International Conference on Automatic Control (ICOAC 2015), April 28-29, Ankara, Türkiye (2015). (PDF) (PDF)
  • Akyürek Ş., Özden G. S., Kasnakoğlu C., Development of An Experimental Setup for the Altitude Control of A Ball in A Pipe, 2015 International Conference on Automatic Control (ICOAC 2015), April 28-29, Ankara, Türkiye (2015). (PDF) (PDF)
  • Şahin İ. H., Kasnakoğlu C., An Affine Parameter Dependent Controller of an Helicopter for Various Forward Velocity Conditions, 2015 International Conference on Automatic Control (ICOAC 2015), April 28-29, Ankara, Türkiye (2015). (PDF) (PDF)
  • Akyürek Ş., Özden, G. S., Atlas E., Kasnakoğlu, C., Kaynak, Ü., Design of a Flight Stabilizer System Using a Hardware-in-the-loop Test Platform, 2015 International Conference on Control, Robotics and Cybernetics (ICCRC 2015), Berlin, Almanya (2015). (PDF) (PDF)
  • Şahin İ. H., Kasnakoğlu C., An Affine Parameter Dependent Controller for an Autonomous Helicopter at Different Flight Conditions, Workshop on Advanced Control and Navigation for Autonomous Aeroespace Vehicles (ACNAAV 2015), June 10-12, Seville, İspanya (2015). (PDF) (PDF)
  • Deveci, O., Kasnakoğlu, C., Performance Improvement of a Theoretically Designed Stand-alone PV System Through the Utilization of MATLAB/Simulink Modeling, European Conference on Renewable Energy Systems (ECRES 2015), October 7-10, Antalya, Türkiye (2015). (PDF) (PDF)
  • Kurkcu, B., Kasnakoglu, C., LQG/LTR position control of an BLDC motor with experimental validation, International Conference on Electrical and Electronics Engineering (ELECO 2015), 796 – 800, Bursa, Türkiye (2015). (PDF) (PDF)
  • Akyurek, S., Ozden, G. S., Kurkcu, B., Kaynak, U., Kasnakoglu, C., Design of a flight stabilizer for fixed-wing aircrafts using H-infinity loop shaping method,  International Conference on Electrical and Electronics Engineering (ELECO 2015), 790 – 795, Bursa, Türkiye (2015). (PDF) (PDF)
  • Cansalar, C.A., Mavis, E., Kasnakoglu, C., Simulation time analysis of MATLAB/Simulink and LabVIEW for control applications, IEEE International Conference on Industrial Technology (ICIT 2015), 470 – 473, Seville, İspanya (2015). (PDF) (PDF)
  • Akyurek, S., Kaynak, U., Kasnakoglu, C., Altitude Control for Small Fixed-Wing Aircraft Using H-infinity Loop-Shaping Method, 6th IFAC Symposium on System Structure and Control (SSSC 2016), İstanbul, Türkiye (2016).
  • Akyurek, S., Kurkcu, B., Kaynak, U., Kasnakoglu, C., Control Loss Recovery Autopilot Design for Fixed-Wing Aircraft, 6th IFAC Symposium on System Structure and Control (SSSC 2016), İstanbul, Türkiye (2016).
  • Cömert C., Kasnakoğlu C., Comparing and Developing PID and Sliding Mode Controllers for Quadrotor, 2017 International Conference on Mechatronics Systems and Control Engineering (ICMSCE 2017), Kayseri, Türkiye (2017).

Ulusal bilimsel toplantılarda sunulan bildiriler

  • Kasnakoğlu, C.,  Serrani, A., Ortalama kuramı ve merkezi katmanlı uzay kuramı ile Galerkin modellerinin çözümlemesi ve doğrusal olmayan kontrolü, Otomatik Kontrol Ulusal Toplantısı (TOK’06), 6-8 Kasım, TOBB Ekonomi ve Teknoloji Üniversitesi, Ankara, 92–99 (2006). (PDF)
  • Kasnakoğlu, C.,  Uyarlama Tabanlı Doğrusal Parametreyle Değişen Modeller ile Akış Problemlerinin Modellenmesi, Kontrolü ve Değerlendirilmesi, Otomatik Kontrol Ulusal Toplantısı (TOK’08), 13-15 Kasım, İstanbul Teknik Üniversitesi, İstanbul (2008). (PDF)
  • Erbil, T.N., Kasnakoğlu, C.,   Akış Kontrolü Problemleri İçin Dalgacık Dönüşümü İle Bölgesel Dinamik Modelleme, Otomatik Kontrol Ulusal Toplantısı (TOK’08), 13-15 Kasım, İstanbul Teknik Üniversitesi, İstanbul (2008). (PDF)
  • Kasnakoğlu, C.,   Doğrusal Olmayan Basit Osilatör Modelleri ile Akış Problemlerinin Frekans Kısıtlı Kontrolü, Otomatik Kontrol Ulusal Toplantısı (TOK’08), 13-15 Kasım, İstanbul Teknik Üniversitesi, İstanbul (2008). (PDF)
  • Kasnakoğlu C., Efe M.Ö., Üç Elemanlı Bir Kanat Profili için İşlemsel Zeka Yaklaşımları ile Akış Özelliklerinin Tahmini, II. Ulusal Havacılık ve Uzay Konferansı (UHUK’2008), İstanbul Teknik Üniversitesi, İstanbul (2008). (PDF)
  • Kasnakoğlu, C., Kaynak, Ü.,   Uçuş Kumanda Yüzeyi Kilitlenme Etkilerini Düzeltici Otomatik Pilot Tasarımı, Otomatik Kontrol Ulusal Toplantısı (TOK’09), 13-16 Ekim, Yıldız Teknik Üniversitesi, İstanbul (2009). (PDF)
  • Erbil, T.N., Kasnakoğlu, C., Dalgacık dönüşümü ile değişik akmazlık koşulları altında akış kontrolü problemlerinin bölgesel modellemesi, Otomatik Kontrol Ulusal Toplantısı (TOK’09), 13-16 Ekim, Yıldız Teknik Üniversitesi, İstanbul (2009). (PDF)
  • Kasnakoğlu, C., Sistem Tanılama ve Çoklu Sistemlerin Harmanlanması ile Akış Problemlerinin Farklı Çalışma Koşulları Altında Modellenmesi, Otomatik Kontrol Ulusal Toplantısı (TOK’09), 13-16 Ekim, Yıldız Teknik Üniversitesi, İstanbul (2009). (PDF)
  • Kasnakoğlu C., Kaynak Ü., Işıkman A. Ö, Yağlıkçı A. G., Koç F., İnsansız Hava Araçları için Kontrol Yüzey Kaybını Dengeleyici ve Yan Rüzgar Koşullarında Çalışabilen Otomatik Uçuş ve İniş Sistemi Tasarımı, TOK 2010 Ulusal Otomatik Kontrol Toplantısı, 21-23 Eylül, Gebze Yüksek Teknoloji Enstitüsü, Kocaeli (2010). (PDF)
  • Özdemir M., Kasnakoğlu C., Görüntü İşleme Tabanlı Nesne Tespiti Kullanarak Eğik Atış Mekanizmalı Uzaktan Vuruş Sistemi Geliştirilmesi, TOK 2010 Ulusal Otomatik Kontrol Toplantısı, 21-23 Eylül, Gebze Yüksek Teknoloji Enstitüsü, Kocaeli (2010). (PDF)
  • Kasnakoğlu C., Kaynak Ü., Yağlıkçı A. G, Koç F., Işıkman A. Ö, Bir İnsansız Hava Aracında Kontrol Yüzeyi Kilitlenmesini Takiben Otomatik Düzeltme ve Özerk Uçuş Yeteneği, SAVTEK 2010, Savunma Teknolojileri Kongresi, Ankara (2010). (PDF)
  • Aydoğdu F., Demirci M. F., Kasnakoğlu C., FPGA Tabalı Paralelleştirilmiş Plessey Köşe Tespiti, SAVTEK 2010, Savunma Teknolojileri Kongresi, Ankara (2010). (PDF)
  • Biyikoğlu, A., Kasnakoğlu, C., Ozbayoglu, A.M., Gungör, A., Özgür, D.Ö. and Uysal, B.Z., Determination of Coal Gasification parameters for the production of Synthesis Gas, 9th National Chemical Engineering Congress (UKMK-9), 22-25 June, Gazi University, Ankara (2010). (PDF)
  • Karaca H. D., Durmaz O., Özen G.D., Kasnakoğlu C., Kurtuluş D.F., Parçacık Görüntülemeli Hız Ölçümlerine Uygun Dikgen Ayrışımı ve Sistem Tanılama Uygulayarak bir Çırpan Kanat Üzerindeki Değişken Akışın Dinamik Modellemesi, Otomatik Kontrol Türk Milli Komitesi 2011 Ulusal Toplantısı (TOK 2011), 14-16 Eylül 2011, Dokuz Eylül Üniversitesi, İzmir (2011). (PDF)
  • Korkmaz H., O. B. Ertin, Ö. Elbir, Kasnakoğlu C., Kaynak Ü., İnsansız Hava Araçları için Donanımlı Döngü Tabanlı Otomatik Pilot Yaklaşımları Geliştirilmesi, Otomatik Kontrol Ulusal Toplantısı (TOK 2012), 11-13 Ekim, Niğde Üniversitesi, Niğde (2012). (PDF)
  • Karaca H. D., Özen G. D., Kasnakoğlu C., Silindir Etrafındaki Akışın Modellenmesi, Analizi ve Girdapların Kontrolü, Otomatik Kontrol Ulusal Toplantısı (TOK 2012) , 11-13 Ekim, Niğde Üniversitesi, Niğde (2012). (PDF)
  • Ertin O. B., Kaynak Ü., Kasnakoğlu C., Sabit Kanat Hava Araçları İçin Döngüde Donanım Benzetim Yöntemi ile Otopilot Sistemi Geliştirilmesi, Otomatik Kontrol Ulusal Toplantısı (TOK 2013) , 26-28 Eylül, İnönü Üniversitesi, Malatya (2013). (PDF) (PDF)
  • Karaca H. D., Özen G. D., Kasnakoğlu C., Üç Farklı Kanat Profili İçin Sürüklenme/Kaldırma Katsayısının Doğrusal Olmayan Kontrolü, Otomatik Kontrol Ulusal Toplantısı (TOK 2013) , 26-28 Eylül, İnönü Üniversitesi, Malatya (2013). (PDF) (PDF)
  • Ertin O. B, Erdoğan M. E., Atlas E., Kasnakoğlu C., Sabit Kanatlı İnsansız Hava Araçları için Düşük Maliyetli Dengeleyici Otomatik Pilot Tasarımı, Otomatik Kontrol Ulusal Toplantısı (TOK 2014) , 11-13 Eylül, Kocaeli Üniversitesi, Kocaeli (2014). (PDF) (PDF)
  • Elbir Ö., Kasnakoğlu C., Dört Rotorlu İnsansız Hava Aracı İçin Dengeleyici Otopilot Tasarımı, Otomatik Kontrol Ulusal Toplantısı (TOK 2014) , 11-13 Eylül, Kocaeli Üniversitesi, Kocaeli (2014). (PDF) (PDF)
  • Deveci O., Kasnakoğlu C., Bir Fotovoltaik Sistemden Değişken Güneş Işınım Değerlerinde Maksimum Güç ve Sabit DA Gerilim Elde Edilebilmesine Yönelik DA/DA Dönüştürücü ve Kontrolcü Tasarımı, Otomatik Kontrol Ulusal Toplantısı (TOK 2014) , 11-13 Eylül, Kocaeli Üniversitesi, Kocaeli (2014). (PDF) (PDF)
  • Kürkçü B., Kasnakoğlu C., Çetin, S., Fırçasız DC Motorun Optimal Durum-Uzayı Kontrolü, Otomatik Kontrol Ulusal Toplantısı (TOK 2014) , 11-13 Eylül, Kocaeli Üniversitesi, 11-13 Eylül, Kocaeli Üniversitesi, Kocaeli (2014). (PDF) (PDF)
  • Deveci O., Kasnakoğlu C., Farklı Atmosferik Koşullarda Maksimum Güç Noktasında ve Sabit Gerilimde Çalışan Bir Fotovoltaik Sistemin Tasarımı ve Kontrolü, Otomatik Kontrol Ulusal Toplantısı (TOK 2015) , 10-12 Eylül, Denizli (2015). (PDF) (PDF)
  • Erdoğan, M. İ., Atlas, E., Kasnakoğlu, C., Sabit Kanatlı İnsansız Hava Araçları için Döngüde Donanımsal Benzetim Tasarımı ve Gerçeklenme Sonuçları, Otomatik Kontrol Ulusal Toplantısı (TOK 2015) , 10-12 Eylül, Denizli (2015). (PDF) (PDF)
  • Akyurek, S., Ozden, G. S., Atlas, E., Kaynak, U., Kasnakoğlu, C., Döngüde Donanımsal Benzetim Test Platformu Kullanarak Otopilot Tasarımı, Otomatik Kontrol Ulusal Toplantısı (TOK 2015) , 10-12 Eylül, Denizli (2015). (PDF) (PDF)
  • Akyürek, Ş., Güçlü, A., Kaynak, Ü., Kasnakoğlu, C., İnsansız Hava Araçları için Çift Telli Sarkaç Kullanarak Atalet Momentlerinin Hesaplanması ve Otopilot Tasarımı, Otomatik Kontrol Ulusal Toplantısı (TOK 2016), 29 Eylül – 1 Ekim, Eskişehir (2016). (PDF) (PDF)
  • Elbir, Ö., Yıldız, H., Kasnakoğlu, C., Dört Rotorlu İHA için H∞ Loop Shape Yöntemi ile Dengeleyici Otopilot Tasarımı, Otomatik Kontrol Ulusal Toplantısı (TOK 2016), 29 Eylül – 1 Ekim, Eskişehir (2016). (PDF) (PDF)
  • Cömert C., Kasnakoğlu C., Dört Rotorlu İnsansız Hava Aracı için Kayan Kipli Kontrolcü Tasarlanması, Elektrik – Elektronik ve Biyomedikal Mühendisliği Konferansı (ELECO 2017), Bursa, Türkiye (2016).
  • Akyürek, Ş., Kaynak, Ü., Kasnakoğlu, C., Sabit kanatlı insansız hava araçları için çevrim şekillendirme yöntemi ile yükseklik tutucu otopilot tasarımı, Savunma Teknolojileri Kongresi (SAVTEK 2016), Ankara, Türkiye (2016).
  • Atlas, E., Güneş, U., Ertin O.B., Kasnakoğlu C., Sabit kanatlı insansız hava araçları için loop shaping kontrolcü kullanarak otopilot tasarımı, Savunma Teknolojileri Kongresi (SAVTEK 2016), Ankara, Türkiye (2016).

Kitaplar veya kitaplarda bölümler 

  • Kasnakoğlu C., New Directions in Flow Control – Reduced Order Modeling, Nonlinear Analysis and Control Design Methods for the Control of Fluid Flow Problems, VDM Verlag (2008) ISBN: 3639100514.